SOUND TEST VIDEO WITH

AER AMPLIFIER

Single Coil
Volume
Body Machined from solid block
Works with Argentine Strings
Works with standard strings
Bobbin Lifetime Warranty
CTS Pots
Neutrik Plugs

Bobbin assembled by José Ramos, owner of Ramos Guitars & Basses.

Pickup Holding System. This holder fix on D hole (because its flat end) and Oval hole guitars, you can change the side where it is placed with 2 screws.

GUZZ PICKUP
Each pickup is made 100% by hand so it will be available to order. We will need 4 weeks aprox. to finish the work specially on the firsts orders because the pre-order list.



2.5 metres of cable is provided 
(Sommer cable and Neutrik plugs)
The potentiometer is signed by CTS.

ES

The pickup thickness under

the strings is 6,8mm.
(Series I was 9,5mm)

SOUND TEST WITH 1940 STIMER AMPLIFIER:
Recorded in Stockholm by Gustav Lundgren - October 2013. 

The Recording:
Guitarist and Amplifier in different rooms.
Amp Microphone: Neumman U87
Guitar: D Hole AJL
Amplifier: Valve Amp
STIMER year 1940

GUZZ PICKUP & 1940 AMPLIFIER STIMER

6.8mm


ACOUSTIC PICKUP

SINGLE COIL

by GUZZ

.- Bobbin 25 years warranty.
.- XLR low noise connector
.- String sound balanced
specially 

    care on 1st and 2nd strings
.- Hand made building.

LOW NOISE CONNECTOR
with Security Lock

The only person we found with the skills to make this job properly. It is a 4mm bobbin! After Series I and II he is a friend to all of us.

Many thanks to Pablo Brotóns, to help us to make the really difficult CAD plans. We spend hours and hours talking by Skype.
Thank you cousin!

SERIES II

SOME IMPORTANT THINGS...PLEASE TAKE YOUR TIME TO READ

THE HOLDING SYSTEM - MORE SOLUTIONS
Some guitars have ribs inside so close to the hole that there is no place to fix the holder. The pickup is prepared for these  cases:
Just remove the holder and use the re-usable adhesive
attached in the pickup box (you can remove it when you want without leaving residue). The pickup back is covered with a very thin transparent film which is perfect to fix the adhesive included. We even tested it on stage and it works perfectly.
ON CURVED TOPS you can use the holder and the adhesive
(placed like the photo) to avoid vibrations. ;)
The re-usable adhesive is the only way to fix this kind of pickup to F holes guitars as well!

CHECK THE PICKUP THICKNESS ON YOUR GUITAR
This pickup is thin enough to fix on almost all gypsy guitars.
If you want to test it: The pickup thickness under the strings is 7mm approx., so to check you have enough space to fix the pickup on your guitar simply cut a 7mm high piece of paper and place it vertically under the strings where the hole is. Push one string on the 12th fret, with the paper in place, if the string does not touch the paper then the pickup will fix perfectly on your guitar!

+